(インド) BISマーク 二次電池規格改訂のFAQ

二次電池規格の改定手続きに関連したFAQです。(例) バッテリーメーカーは、切り替え後に改訂された規格に従って新しいR. No.を取得しましたが、そのようなバッテリーを使用するホスト製品ごとにCCL更新を提出する必要がありますか。(はい、CCLの更新が必要であり、2020年9月14日までに完了する可能性があります。)

 

IS16046 (パート1): 2018 / IEC62133-1: 2017  IS16046 (パート2):2018 / IEC62133-2: 2017

FAQs
FAQs on Changeover Guidelines for Implementation of revised Standards of Batteries / Cells i.e. IS 16046(Part-1):2018/IEC 62133-1:2017 – for Nickel Systems and IS16046(Part-2):2018/ IEC62133-2:2017 – for Lithium Systems
Q1 : As a manufacturer located outside India can we import Batteries / Cells as per IS 16046:2015 afterthe last date of implementation.
A1 : Import of Batteries / Cells after the last date of implementation is not permitted

Q2 : As a domestic manufacturer, can we manufacture Batteries / Cells as per IS 16046:2015 after thelast date of implementation
A2 : Manufacture of Batteries / Cells as per IS 16046:2015 after the last date of implementation is not permitted.

Q3 : If stock of the Batteries / Cells as per IS 16046:2015 could not be exhausted by the last date of implementation , in that case what we have to do as a Stockist of Batteries / Cells ?
A3 : If product has been imported to India before the last date of implementation or manufactured by the domestic manufacturers before the last date of implementation, then the stock can be sold in India.

Q4: Can we Switchover Battery Models to revised standards, if the battery incorporate Cells as per IS16046:2015 ?
A4: Battery to be registered as per revised standard needs to incorporate Cells registered as per revised standard

Q5:We are using Batteries as a component for manufacture of our product. If the stock of our host product fitted with Batteries as per IS 160465:2015 could not be exhausted till the last date of implementation what is to be done?
A5 : Host product incorporating batteries manufactured as per IS 16046:2015 before the last date of implementation can be sold in the market.

Q6 : We are using the Batteries as a component for manufacture of our product. We have a stock of Batteries as per old Standard which could not be exhausted till 14.03.2020 , in that case what we have to do?
A6 : Batteries as per IS 16046:2015 manufactured/imported before the last date of implementation can be used for manufacture of host product.

Q7 : We are using the Batteries as a component for manufacture of our product, if MeitY ask a Model for Surveillance testing but the battery in the product is not as per revised Standard , in that case our product will be accepted or not ?
A7: Batteries as per IS 16046:2015 manufactured/imported before the last date of implementation can be used for manufacture of host product.

Q8: Will separate R. No. be required within the Lithium Systems for different types of Lithium system batteries/ cells i.e. Li-ion, Li-Polymer, Li-iron Phosphate etc.?
A8 : Cells and battery need to be applied under separate registrations. Single registration is required for Lithium Systems, which will incorporate all the different types of Li chemistry.

Q9: We have submitted the surveillance fee to MeitY against our current R. No. When we get the new R. No. then can our payment be adjusted to new R. No. ?
A9: The surveillance fee matter needs to be addressed by MeitY, for Option A or as well as Option B.

Q10 : We have obtained new registration number (Option A/Option B). What will be the status of our registration as per IS 16046:2015
A10: Both registrations will run concurrently. However, registration as per IS 16046:2015 will be cancelled after the last date of implementation i.e. 14 March 2020.

Q11 : Should I go in for Option A or Option B ?
A11 : Both options have certain advantages as well as limitations. You can decide keeping in mind the number of models and your processes.

Q12: We have opted for Option A. Do we have to switchover all the Models of existing R. No. to new R.No. in one go or we can switch over in phases?
A12: Switchover can be in phases when submitting changeover (Supplementary) test reports based on earlier test reports. However, complete test reports as per revised standard need to be submitted as inclusion and not as changeover.

Q13: We have opted for Option B and obtained new registration for few models. Now we want to know the procedure to transfer the models already existing in our old registration as per IS16046:2015
A13: The Models already existing in the old registration as per IS 16046:2015 will continue to be valid upto the last date of implementation or validity of registration whichever is earlier. Those models can be included in new registration on submission of complete test report through an inclusion.

Q14: Which is the last date upto which BIS will accept fresh application/inclusion/renewal as per IS16046:2015 ?
A14: Fresh application/inclusion/renewal as per IS 16046:2015 will be accepted by BIS upto one month prior to the last date of implementation i.e. 14 Feb 2020.

Q15 : Battery manufacturer has obtained new R. No. as per revised standard after changeover, do we need to submit CCL updation for each of our host product using such battery.
A15: Yes, CCL updation will be necessary and may be got done by 14 Sep 2020 (six months from implementation date)

Q-16 : What will be the marking on Li-system Cell or Battery ?
A-16 : Marking on Lithium System Cells and Batteries as per IS 16046(Part-2):2018/ IEC 62133-2:2018 and further referred as per IS 16047(Part-3):2018/IEC 61960-3:2017 shall be clear and durable as given below:
– Secondary (rechargeable) Li or Li-ion
– Cell or Battery Designation as per Cl.5.1 of IS 16047(Part-3):2018
– Polarity
– Date of manufacture (which may be in code)
– Name or identification of manufacturer or supplier
– Rated capacity
– Nominal voltage

Q-17 : What will be the marking on Nickel system (Nickel-Cadmium ) Cell or Battery ?
A-17 : Marking on each Nickel System ( Nickel-Cadmium) Cell as per IS 16046(Part-1):2018/ IEC62133-1:2018 and further referred as per IS 16048(Part-1):2013/IEC 61951-1:2006 shall be durable as given below:
Small prismatic cells and Cylindrical Cells:
– Sealed, rechargeable nickel-cadmium or Ni-Cd
– Cell Designation as per Cl.5.1 of IS 16048(part-1):2013
– Rated Capacity
– Nominal Voltage
– Recommended charge rate and time or permanent charge current for ‘T’ Cells
– Polarity
– Date of manufacture (which may be in code)
– Name or identification of manufacturer or supplier
Butten Cells :
– Cell Designation as per Cl.5.1 of IS 16048(Part-1):2013
– Polarity
– Date of manufacture (which may be in code)
– Name or identification of manufacturer or supplier

Q-18: What will be the marking on Nickel system (Nickel-Metal Hydride) Cell or Battery ?
A-18: Marking on each Nickel System ( Nickel-Metal Hydride) Cell as per IS 16046(Part-1):2018/IEC 62133-1:2018 and further referred as per IS 16048(Part-2):2013/IEC 61951-:2011 shall be
durable as given below:
Small prismatic cells and Cylindrical Cells:
– Sealed, rechargeable nickel-cadmium or Ni-Cd
– Cell Designation as per Cl.5.1 of IS 16048(part-2):2013
– Rated Capacity
– Nominal Voltage
– Recommended charge rate and time or permanent charge current for ‘T’ Cells
– Polarity
– Date of manufacture (which may be in code)
– Name or identification of manufacturer or supplier
Butten Cells:
– Cell Designation as per Cl.5.1 of IS 16048(Part-2):2013
– Polarity
– Date of manufacture (which may be in code)
– Name or identification of manufacturer or supplier

本資料は参考用資料です。本資料の情報に基づいて行った行為により生じたいかなる結果に関しても、弊社では責任を負いかねます。本資料のいかなる部分も、許可なく複製することを禁じます。株式会社PS Farm

株式会社 PS Farm

〒516-0014
三重県伊勢市楠部町248-1
TEL:0596-63-8230
FAX:0596-63-8231